Introduction of 6061 Alloy Aluminum
6061 Alloy Aluminum is a heat-treatable strengthenable alloy with good formability, weldability, machinability,
and at the same time medium strength, which can maintain good workability after annealing
A.Typical use of 6061 alloy aluminum
Aviation fixtures, trucks, towers, boats, pipelines, and other architectural applications where strength,
weldability and corrosion resistance required.
B.Chemical composition range
0.4-0.8Si, 0.70Femax, 0.15-0.40Cu, 0 15Mnmax, 080-1.20Mg, 004-0.35Cr, 0.25Znmax, 0.15Timax,
the maximum content of each other component is 0.05, the maximum total content of other components is 0.15, and the balance is Al.
6063 aluminum alloy is widely used in the frame of building aluminum doors and windows and curtain walls.
In order to ensure that doors and windows and curtain walls have high wind pressure resistance, assembly performance,
corrosion resistance and decorative performance,
the comprehensive performance requirements of aluminum alloy profiles are much higher than those of industrial Profile standards.
The lowest price of 1xxx pure aluminum is relatively wide.
2xx hard aluminum copper alloy is generally used for natural aging after quenching.
Because of copper content, the price will be relatively high.
The price is higher than that of pure aluminum, and the scope of application is relatively wide.
4xxx generally use on aviation standards.
5x, aluminum-magnesium alloy anti-rust aluminum has medium strength and good bending performance.
The price of 5052 of Southwest Aluminum is around 30,500. Artificial aging after quenching, relatively good cutting performance, medium strength, suitable for parts processing.
Now the price of 6061 of Southwest Aluminum is around 37,000, but the goods are very small.
The imported general thin plate is 62,000 yuan per ton, and the thick plate is 58,000 yuan per ton.
7sxx, super hard aluminum, the best material, used in the high-end market, very few domestic, imported generally between 100,000 yuan per ton to 10,500 yuan per ton.