Polyester color coated aluminum coil

Polyester color coated aluminum coil, A polyester coating formed by multiple baking of the surface of an aluminum sheet can form a solid,

a continuous film with a protective decorative property.
It can give rich color to the color aluminum products, and has good gloss and smoothness, as well as superior texture and hand feeling,

and can also add layering and three-dimensionality.
Protected objects are exposed to the atmosphere and are exposed to ultraviolet radiation, wind, rain, frost, and snow.
The coating acts as a protective agent due to temperature differences, freeze-thaw cycles, corrosive gases, and microbes.
Especially suitable for interior decoration and advertising panels.
We can color according to RAL and Pantone international color cards or customer samples.

Polyester color coated aluminum coil

The main features of polyester color coated aluminum coils are as follows:

Corrosion resistance: because the surface has a tight oxide film,
Has strong adhesion, oxidation resistance, acid and alkali resistance,
Corrosion resistance, decay resistance, UV resistance, and other characteristics.

The color is uniform and lasting.
Its color is even and delicate, soft and beautiful.
The pre-roller color coated aluminum coil avoids the individual chromatic aberration of conventional spraying.
No matter how large the ceiling, the color of the color is always new.

The combination of rigid and tough, the strength of the board is extremely high.
The pre-roller color coated aluminum coil is rigid and tough, and can be cut, slit, curved, balanced, drilled,
Connection fixing and edge compression molding.

Material: A1100, A1050.1060.1070.
A3003 color coated aluminum coil, A3004 color coated aluminum coil. 3105 color coated aluminum coil, A5052 coated aluminum coil, A8011

Coating: polyester color coated aluminum coil

Aluminum plate thickness: 0.2mm-4.00mm

Standard width 1000-1250mm Special width: 50mm-1700mm

Core diameter: 150mm, 405mm, 500mm, 505mm, 510mm

Coating thickness: PVDF (fluorocarbon) >=25micron
POLYESTER(polyester)>=18micron

Gloss: 10-90%

Coating hardness: greater than 2H

Adhesion: no less than level 1

Impact resistance: 50kg/cm without peeling paint without cracks