Color Coated Aluminum Coil Features

Color coated aluminum coil features are the surface coating coloring of the aluminum coil to extend the life of aluminum.

After the aluminum coil is processed by washing, chromizing, roll coating, baking, etc.,

the surface of the aluminum coil coated with

the paint of various colors, which becomes a pre-roller coated aluminum coil.

The surface coating paint divided into polyester ( PE) coated aluminum coil and

fluorocarbon (PVDF) coated aluminum coil;

Of course, they’re also a case where fluorocarbon coated on one side and polyester is coated on the other side;

even fluorocarbon is coated on both sides. situation.

 

The color coated aluminum coil has the following characteristics:

Flatness: There is no composite high-temperature indentation on the surface,

no residual stress on the surface, and no deformation after shearing.

Decorative: The pattern is free to do, giving customers a wide range of personality choices,

enriching the humanistic connotation of the product,

with a realistic sense of materiality, a fresh natural beauty, and a beautiful enjoyment for people.

Weather resistance: After baking, high-temperature baking, the paint pattern is high,

the gloss retention is high,

the color stability is good, and the color difference is minimal.

Mechanical: The use of high-quality aluminum,

plastics and adhesives, using advanced composite technology.

The product has the bending and bending strength required for the decorative board.

Under the four-season climate, the changes in wind pressure, temperature,

humidity and other factors will not cause bending, deformation, and expansion.

Environmental protection: resisting salt and alkali acid rain corrosion,

it will not corrode and produce germs,

and will not release any toxic gas, and will not cause corrosion of keel and fixing parts, and flame retardancy.

Color Coated Aluminum Coil Features

1 The temperature resistance is good, the melting point of aluminum is 660 degrees,

and the general temperature does not reach its melting point.

2 The pre-roller color coated aluminum coil is environmentally friendly and difficult to change.

It operated with chromium-free treatment liquid.

The roller paint contains active chemical molecules to promote the formation of a protective layer on the surface of the material.

The active chemical molecules are stable and easy to recycle, meeting environmental protection requirements.

3 corrosion resistance.

Because its surface has a strict oxide film, it has strong adhesion, oxidation resistance, acid resistance,

alkali resistance, corrosion resistance, decay resistance, UV resistance and so on.

4 color uniform, long-lasting, its color is even and delicate.

Soft and beautiful, pre-roll coated color coated aluminum roll avoids the individual color difference phenomenon of traditional spraying,

no matter how large the ceiling, its color, and color are consistent.

5 rigid and tough combination, the strength of the board surface is extremely high.

Pre-roller coated aluminum coated with a combination of toughness,

can cut, stripped, curved, balanced, drilled, fixed and edge compression molding.

Pre-roll coated aluminum-coated aluminum coil widely used in many fields such as thermal insulation board,

aluminum curtain wall,aluminum-magnesium manganese roofing system, aluminum ceiling, etc.

due to its lightweight, bright color, easy processing, and no rust.