Color Aluminum Coils
Also known as color coated aluminum coils, color coated aluminum sheets, and roll coated aluminum coils.
A product after the aluminum coil is pretreated, painted and baked.
CAMELSTEEL offers color coated aluminum coils, color aluminum plates, and other products with a thickness of 0.2-1.2mm.
Provide fluorocarbon color coated aluminum coil (PVDF), polyester color coated aluminum coil (PE), epoxy paint color coated aluminum coil and other products.
With the advantages of less order quantity, low price and short delivery period, it can provide subsequent processing such as opening, slitting and pressing.
Color:
CAMELSTEEL can process a variety of color aluminum coils, color coated aluminum coils, and coated aluminum coils according to customer-supplied samples.
It can also be color-coded according to the application and RAL and PANTONE color code, and samples of various colors are available free of charge.
Material:
Available in 1100, 1060, 3003, 3004, 5052 and other color aluminum coils, thickness and color can be customized.
The color aluminum coil is made of paint coating to give the aluminum plate a rich color,
and has good gloss and smoothness, as well as superior texture and hand feeling,
and can also increase layering and three-dimensional feeling.
It protects the material from exposure to the atmosphere and is exposed to ultraviolet radiation, wind, rain, frost, and snow.
The coating acts as a protective effect due to temperature differences, freeze-thaw cycles, corrosive gases, and microorganisms.
Color aluminum coils are widely used in many places, and their production processes are more complicated and strict.
Especially in terms of painting.
To ensure its coating effect, it must ensure that the following aspects meet certain requirements.
1. Raw materials.
Coatings and aluminum sheets are the most influential factors in the coating process. Due to the color difference between the batches of coatings,
the coating fineness not enough, the coating rate not high, the coating and solvent not well-matched, the layering, etc.
Directly affecting the coating effect, resulting in the unevenness of the aluminum coil substrate, uneven film thickness, poor edge deflection, etc.
It also directly affects product quality and overall use.
Therefore, when selecting raw materials, it should be strictly controlled.
2. Equipment.
The coating line requires that the painting equipment is in good condition, the painting equipment requires a stable operation,
no horizontal and vertical shaking and the coating roller requires fine grinding.
All rollers of the coating machine will jump laterally and must be controlled within the allowable range, otherwise,
the surface of the coating will seriously affected.
3. Quality process.
The coating process closely related to the quality of the coating, and it required to control the relative line speed ratio of the coating roller,
the paint roller, the metering roller and the substrate within a certain range.
According to the different systems and the film thickness of the coated product,
a certain viscosity range set for the coating to ensure smooth coating and promote the improvement of product quality.
To ensure that the above aspects meet the standards, we can produce high-quality color coated aluminum coils,
in line with the requirements of the majority of users.